Test equipment list
- Share
Test equipment list | ||||||
| Photo | Equipment | Brand | Model | Route(mm) | Qty | |
 | CMM | Mitutoyo | 7106 | 700*1000*600 Minimum representation：0.001 | 1 | |
 | Tool microscope | Mitutoyo | MF-3017B | 300*175 | 1 | |
 | Tool microscope | Mitutoyo | MF-176-684-11 | 200*175 | 1 | |
 | Joint arm coordinate measuring machine | HEXAGON | RA75R | ±0.006 | 1 | |
 | Automatic height gauge | Mitutoyo | LH-600 518-341DC | Range：0-972 Accuracy：（1.1+0.6L/600)μm | 1 | |
 | Manual height gauge | Mitutoyo | 570-304 | Range：0-600 Accuracy：0005*/0.01 | 1 | |
 | Concentricity tester | Mahr | 08091610861 | 0.001mm | 1 | |
 | Pin gsuges | INSIZE | - | 0.2mm-10mm | Some | |
 | Dial gauge | Mitutoyo | 543-563 | Range:60.9 Accuracy：0.0025 | 2 | |
 | Roughness measuring machine | Mitutoyo | SJ-410 | Ra,Rq,Rz,Ry,RP…… | 1 | |
 | Hardness tester | EXTRON | HR-150A | Hardness range ：20-70HRC | 1 | |
 | Hand-held hardness tester | The peak of the times | HL100B | Hardness range:20-68HRC | 1 | |
 | Marble platform | - | - | Flatness 0.01mm | 1 | |
 | Digital caliper | Mitutoyo | - | 0-150mm/0-200mm 0-300mm/0-500mm | Some | |
 | Pitch callipers and caliper depth rule | INSIZE/SHAHE | - | 0-200/0-150 | Some | |
 | Dial gauge | Mitutoyo | 513-404 513-405 | 0.01/0.001 | Some | |
 | Digital micrometer | Mitutoyo/Quantity | Tooth thickness Testing Slot Testing Outer Diameter Testing | 0-25/25-50/50-75/75-100 175-200/200-225/225-250 250-275/300-400 | 37 | |
 | Inner hole caliper | Mitutoyo | MF-3017B | 0-φ65 | 2 | |
 | Holtest | INSIZE | LH-600 | φ6-φ100 | 16 | |
 | Go/no go gage | Quantity | 6C-100C | φ2-φ85 | Some | |
 | Thread ring gage | Quantity | - | M/PT/G/RC | Some | |
 | Thread plug gage | Quantity | - | M/PT/G/RC | Some | |
 | Pin Gage | YKP | - | φ3φ4φ5φ6φ8φ10 φ12φ14φ16φ18φ20 | 44 | |
 | Gauge block | INSIZE | Made of Ceramics Made of Metal | 1-100 | 2 | |
 | Feeler gauge | - | 100B 17 | 0.02-1 | 5 | |